I successfully made a live USB of the Kali Linux. When I boot from the USB it gives an option to install. I clicked on that option. At one point it was detecting and mounting CD-ROM drives. As I have no CD-drive or any ROM-drive on my laptop, it gives an error Can't mount and detect CD-ROM drives. I tried the 'live something' option that takes me directly to Kali Linux and it loads successfully but I can't install it permanently. I want to install it so I won't have to waste my time plugging and unplugging the USB.

How to get past the CD-ROM detection and make the installation finish correctly? Game sepakbola manager spek rendah untuk pcp. You could resolve the error by repeating the steps: Run the installer.

I've tried both testing and unstable amd64 installer now with the same result 'No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of the installer and the kernel version available in the archive.' Wrong kernel in debian-installer package. Wrong kernel in debian-installer.

Open a shell ( ALT + F2). Create the directory cdrom directly on the root of the file system: mkdir /cdrom Note: If you got problems making the directory /cdrom, disable the CD-rom player in BIOS or disconnect the cable Mount the USB as if it is a CD-ROM: mount -t vfat /dev/sdb1 /cdrom Where sdb1 is your USB device. You could carry on installation now After executing mount -t vfat /dev/sdb1 /cdrom, cd into the /cdrom directory and do an ls to see if the files are there. Then press ALT- F1 to go back, continue and re-select 'detect CDROM' Source: and Another was: when the Window shows CDROM couldn't be mounted, • Unplug your USB from system and re insert it • wait for mount/ detection (usb LED glow) • Hit Continue You could do what I did. Hit escape, type install, hit enter, skip CD drive.

I tried all the answers here and more google results, but none worked. I eventually figured it out, the issue is the file format is not vfat, but iso9660. When you get the CDROM not found error follow these steps: Enter a shell ( CTRL+ Alt+ F2) Note: Kali told me to press ( Alt+ F2), but this didn't work Get a list of devices with blkid: ~ # blkid /dev/sdc1: UUID='2018-04-12-12-04-16-00' LABEL='Kali Live' TYPE='iso9660' PARTUUID='81c5e086-01' Note: I have shortened my list to the relevant row. Also you can see the storage type is iso9660, not vfat Mount the Kali CD with the mount command: ~ # mount -t iso9660 /dev/sdc1 /cdrom Check the contents of /cdrom are as expected: ~ # ls /cdrom autorun.inf efi g2ldr.mbr md5sum.txt win32-loader.ini boot efi.img install pool debian firmware isolinux setup.exe dists g2ldr live tools Switch back to the installer ( CTRL+ Alt+ F5) Note: Kali told me to press ( Alt+ F1), but this didn't work. I tried F1 through to F5 until I found the correct combination From the menu tell it to mount the CDROM, if asked choose /dev/sdc1 and /cdrom. I know we have already mounted the drive, but for some reason this step didn't work previously, but worked fine after following the previous steps.

The install will now continue as normal.

I have an 8 channel USB Relay board which I have connected via USB. The manual for the board states that: To use this product with Linux, USB CDC driver needs to be compiled in with the kernel. Fortunately, most Linux distributions (Ubuntu, Redhat, Debian etc.) has this driver pre-installed. The chances of you requiring to rebuild the kernel to include the USB CDC driver is very slim. When connected to a Linux machine, this product should appear as a serial port in the /dev directory. Usually the name of the device will be ttyACMx or similar. The name may be different depending on the Linux distribution you have.

In my case (running Gentoo), I did have to include the driver for USB CDC ACM to the kernel. Plugging in my relay, I can see this using dmesg: [63] usb 4-1: new full-speed USB device number 4 using uhci_hcd [17] usb 4-1: New USB device found, idVendor=2a19, idProduct=0c02 [22] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [25] usb 4-1: Product: Numato Lab 8 Channel USB Relay Module [28] usb 4-1: Manufacturer: Numato Systems Pvt. Running lsusb I see ttyACM0 appear.

But sending command strings to it using echo -ne 'string' > /dev/ttyACM0 has no effect. Additionally, ls -al of /dev shows that ttyACM0 is not a character device file. In fact it shows: -rw-rw-rw- 1 root root 13 Nov 9 09:38 ttyACM0 Is there some other driver or module which I need to enable? Why doesn't ttyACM0 show as a character device? Is there something wrong with the way I am sending the commands to ttyACM0? I have the relay running successfully on Windows after I install the Windows driver provided by the company. I can send it commands using PuTTY with no problems, but I can't find out what I haven't done right on Linux.