Nov 02, 2008  More about dell ultrascan p1110 sony trinitron realzeus Oct 24, 2008, 8:32 PM It really depends on the model but as a general rule of thumb you cannot go wrong with a Sony Trinitron.

Hi, The part where you see some color bars and blinking green led is what we call MONITOR SELF TEST. A diagnostic pattern consisting of four colors (red, green, blue and white) appears, and the LED flashes slowly.

This happens when signal cable from the monitor is disconnected from the tower and leaving the power chord for the monitor plugged in. If the monitor works properly on a different computer. Then its a problem with the computer's video card sending out signal.

Im 85% sure that its a problem with your video card. 281 views 0 helpful votes. Redux 3.: all i typed before is wasted. (off topic) first off you need to ask dll this, fix yah can not fix dell bad code ever. The PC runs perfect, is the topic. Sahil pe khare ho mp3 free download dailymotion video. Sub topic: Dell recovery software is buggy or you PC is not really new.

1: new PC 4 months old sold by whom. Ebay amazone or one of 1000s of refurb places (even walmart has them) 2: is the dell warranty expired,???? 3: what are the dates in the bios INFO page. 4: if the PC is not really new, but refurb the licensein the machine can be wrong, (non dell OEM license) or was licensed as w7 /8 before. 5; why not ask dell this, fixya is not dell.com not by a mile. Here is 1 example of a refurb. Here are 2 cheap i can buy those add the missing parts for 50 or less and sell them for 5 times more.

Called a refurb. So knowing this fact one can get anything sold as new but not new. Bentley map v8i.

Here is where to ask. Only dell can fix dell software, it is not open source. At all. 1,562 views 0 helpful votes. But don't read internet rumors. Learn to test.

Learn to gather you own facts, do tests. Measurements are the only facts. Why in the world run 50Hz sync,? CRT are like dead now. Nobody uses them today and posts on CRT are very rare here, but fun to answer. Why not RTM the manual tells you the sync rules.

Edited CNET page is full of errors, Common for them. Try the manual from my fav spot, (very old manuals) factory preset #4 what is wrong with that,?

75hz there, why not use what the engineer recommends 1,2,3,4 presets, be wise to do that. In fact 50 Hz ~ 160 Hz (Vertical sweep rates) its 13 years old, so that would be the life limiting factor now, old age, for sure.!!!

Vert sync 60Hz max 160Hz. 153 views 0 helpful votes. M1004 is usually a mainboard fault - overheating. If the system is under warranty, have the mainboard replaced. Otherwise follows the suggested steps there in to safely access the parts involved. The culprit was the 'microprocessor thermal-cooling assembly'. When removing it from the chassis, you could see that next to its outlet side (the downstream side re-air flow through it), at the fan housing inlet point, the air inlet path to the fan was blocked with dust (like a self-supporting curtain, or like a dryer screen collecting lint -- but without the screen!). So this 'dust curtain' was then manually removed, followed by reinstalling removed parts, & the PC now runs beautifully again!

It's amazing how sluggish the notebook had gotten over a period of several months, before I realized what the problem was (an alert finally appeared on the screen about overheating, after the PC began to shut down on its own). So now, it's its old self again -- the fast running notebook that I really enjoy. 166 views 1 helpful votes.