>>> >>>I tried to rent a crane, once. In any case, I'd love to >>>> rent that for an event! George foreman grill cooking times.

Last Updated on Wed, 14 Feb 2018 'Removing the Main Board Unit'(p.78) 3.4 Troubleshooting by Symptom 3.4.1 Problems in Printing Operation This section provides how to troubleshoot the possible problems on the printer mechanism. No error message appears for most of the troubles described here. In the following tables, find the symptom you face and follow the troubleshooting procedure given in the table. □ Paper Feeding Problems Symptom Table 3-12. Troubleshooting Paper Feeding Problems Possible Cause The LD Roller is contaminated or worn-out Check Point Is there any 'micro pearl' paper dust or oil stain on the LD Roller? Remedy Use a cleaning sheet in order to clean the rollers. Set a cleaning sheet in the ASF turning the sheet upside down.

A guide to using an Epson Adjustment Utility to reset the waste ink counter on your Inkjet printer. Includes: tips on what to avoid as a well as information. The Epson Adjustment Program for Epson R265 can be used under Windows only (Millenium, 2000, XP, Vista [in compatibility mode]). To find out how to use this utility to reset the waste ink counter we recommend reading the.

Press the button on the operation panel to load the sheet. Repeat the above procedure several times. In order to remove a severe smear, staple a cloth moistened with alcohol to a post card and carry out the following operations.

Set the post card in the ASF with the attached cloth facing the LD Roller or Retard Roller. Then, holding the top edge, press the button on the operation panel to load the card. Repeat Step 2. The paper dust or oil stain on the LD Roller or the Retard Roller surface is removed. If this does not solve the problem, replace the LD or Retard Roller.

Paper is not fed into the printer. The Pickup Roller and Idle Roller are contaminated or worn-out Is there any 'micro pearl' paper dust or oil stain on the Pickup and Idle Rollers? Wipe the roller surface with a cloth moistened with alcohol. Malfunction of the Paper Feed Mechanism Is there a malfunction of the Paper Feeding Mechanism? □ Correct the phases of the Paper Feed Mechanism. □ Remove any dust or foreign matter in the Paper Feed Mechanism. Is the PE Sensor connector disconnected from the Main Board or the sensor?

Connect the PE Sensor cable to the Main Board and the PE Sensor correctly. R360/R380/R390: CN8 / R260/R265/R270: CN6 Is the Torsion Spring 0.22 detached or attached incorrectly? Attach the Torsion Spring 0.22 and the PE Lever correctly.

Malfunction of the PE Sensor and PE Lever Is the PE Sensor damaged? Replace the PE Sensor. Symptom Possible Cause Multiple sheets are fed at a time. A malfunction of the Retard Roller Table 3-12.

Troubleshooting Paper Feeding Problems Attach the Extension Spring correctly Check Point Remedy Is the Extension Spring 1.98 at backside of the Retard Roller detached? Is the Retard Roller detached? INstall the Retard Roller correctly. □ Problems with ejecting paper Table 3-13. Troubleshooting Paper Ejecting Problems Symptom Possible Cause Check Point Remedy Paper jam occurs during ejecting paper. A malfunction of paper feeding mechanism Is the PF Roller not moving correctly without its drive force transmitted to the EJ Roller? Engage the gears in the paper feed mechanism correctly.